Table of Contents
Advertisement
[F] Handle cover / Cover lock bracket
(1)
Open the front cover (MJ-1103) or the front
upper cover (MJ-1104).
(2)
Remove 2 screws, and then take off the han-
dle cover.
(3)
Remove 1 screw, and then take off the cover
lock bracket.
[G] Rear cover
(1)
Remove the finisher cable out of the groove
of the rear cover.
(2)
Remove 5 screws, and then take off the rear
cover by sliding it upward.
[H] Access cover
(1)
Remove 2 screws, and then take off the
access cover by sliding it upward.
Note:
When installing, hang 5 hooks of the board
access cover on the holes of rear cover.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Handle cover
Cover lock
bracket
Finisher cable
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 6
Fig. 4-15
Rear cover
Fig. 4-16
Board access cover
Fig. 4-17
Hide quick links:
Advertisement
Table of Contents
