Toshiba MJ-1104 Service Manual page 30

• Center-binding mode
Paper is exited following the procedure below when the Saddle Stitch Finisher is installed.
1 The stacker is moved to the stapling position according to the detected paper size.
2 Paper is transported to the stacker and then side alignment operation is performed.
3 The stack of paper is stapled after the alignment for the last page is finished.
4 The stacker is moved to the paper folding position to fold the paper.
5 The paper is transported to the additional folding position to be folded again.
6 The paper is exited to the saddle tray.
Side alignment Unit
MJ-1103/1104
DESCRIPTION OF OPERATIONS
Stapler unit
Fold unit
EFS unit
6
Saddle tray
Junction box
2
3
4
5
1
4
Fig. 3-3
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
3 - 2
Stacker