Toshiba MJ-1104 Service Manual page 131

(10) Take off the 2 Jam release levers, 2 springs
and lower folding roller.
[E] Exit roller
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Remove 2 screws and take off the lower
transport guide.
Note:
Be careful not to damage the harness con-
nected to the lower transport guide.
(3) Remove 1 clip and take off the bushing and
exit roller.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Spring
Jam release lever Lower folding roller
Fig. 4-177
Lower transport guide
Fig. 4-178
Clip
Bushing
Fig. 4-179
4 - 63
Spring
Jam release lever
Exit roller
Clip
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4