Toshiba MJ-1104 Service Manual page 82

(9) Open the stationary tray.
(10) Remove the spring, and then loosen 2
screws to free the belt tension.
(11) Take off the belt.
(12) Disconnect the connector of the front cover
switch.
(13) Remove 6 screws, and then take off the junc-
tion box unit by sliding it upward.
Note:
When installing the junction box unit, hang
the 2 hooks of the cover on the hooks of the
frame.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Spring
Belt
Hook
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 14
Fig. 4-38
front cover switch
Fig. 4-39
Junction box unit
Fig. 4-40