Using Copy Templates - Siemens SINAMICS S120 Commissioning Manual

3. Select a device / several devices in the project tree.
OR
Select one network / several networks in the network view.
4. Drag your selection and drop it into folder "Master copies".
The selected device is inserted as master copy in the library.
Procedure (global libraries)
Proceed as follows to create a master copy in a global library:
1. Open task card "Libraries".
2. Click on "Global libraries" to open the palette.
3. Create a new library.
OR
4. Open an existing library.
5. Select a device / several devices in the project tree.
OR
Select one network / several networks in the network view.
6. Drag your selection and drop it into folder "Master copies".
The selected device is inserted as master copy in the library.
Important notes
• If several devices have been selected, an entry is created in the library for each device.
• Folders (e.g.
• Independent of their name in the project tree/network view, you can rename library
elements as required.
4.10.3

Using copy templates

Overview
You can reuse archived libraries in as many projects as required, in order to be able to perform
series commissioning, for example.
Procedure
Proceed as follows to use an existing master copy from a library.
1. Open the "Libraries" task card.
2. Click on "Project library" to open the palette.
OR
3. Click on "Global libraries" to open the palette.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
for drives) are represented the same as in the project tree.
Fundamentals
4.10 Using libraries
93