Commissioning
5.10 Configuring brake control
Making settings for the brake feedback
To make the settings for the brake feedback, proceed as follows:
1. Select the "[1] Yes" setting in the "Brake with feedback" (p1275.5) drop-down list.
The mask then expands downwards with the additional settings.
2. Interconnect the "Brake open feedback" (p1223) signal sink for the "Brake open" feedback.
3. Interconnect the "Brake closed feedback" (p1222) signal sink for the "Brake closed" feedback.
272
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2