Startdrive engineering tool
3.2 User interface - parameterization
Structure of the dialog
The following figure shows an example of the structure of the dialog.
①
Drive object type of the motor controls
②
Activation of the parallel connection view. In the parallel connection view, only the parallel connection-capable
components are displayed.
③
The following information is displayed in the columns:
•
Drive object type
•
Component type
•
Identification via LED. Is controlled on the Control Unit via parameters p9210 and p9211.
•
DRIVE CLiQ connection of the components
•
Article number of the component
④
List of the non-assignable components
⑤
List of the main components and assigned components
⑥
Creation information (optional)
Figure 3-8
Example: Device configuration detection
50
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2