Commissioning
5.7 Basic parameterization of the drive objects
Requirements
• The motor used in the device configuration of the drive axis is completely specified and
configured.
Note
This basic parameterization cannot be performed without having completed this full
configuration.
5.7.4.5
Optimization runs
Overview
Using the "Optimization run" function, you can calculate motor and controller data for motors in
the motor list as well as for non-listed motors.
Requirements
• The motor used in the device configuration of the drive axis is completely specified and
configured.
Note
Specifying third-party (non-listed) motors
When third-party motors are specified, the motor data must be manually entered (see
Chapter "Inserting and specifying motors that are missing from the motor list (Page 136)").
Note
This basic parameterization cannot be performed without having completed this full
configuration.
232
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2