Online Diagnostics - Siemens SINAMICS S120 Commissioning Manual

Diagnostics
6.2 Diagnostics via Startdrive
OR
1. In the project tree, select one or several trace configurations in the drive
2. Call the "Delete" shortcut menu to delete the trace configurations in the drive.
A confirmation prompt opens.
3. To confirm the deletion, in the query, click on "Yes".
The selected trace configuration is deleted.
6.2.3

Online diagnostics

Overview
In the diagnostics view, you are working in online mode and see the most important drive
information or make important basic settings.
Requirements
• There is a physical connection between the Ethernet interface of your PG/PC and the Ethernet
or PROFINET interface of your drive.
Calling diagnostics
Proceed as follows to display diagnostics and diagnostic functions for a drive unit connected
online:
1. Open the "Online access" entry in the project tree.
2. Select the network interface of your PG/PC.
3. Double-click "Update accessible devices".
The accessible device is displayed with IP address in the project tree.
4. Establish an online connection to the device.
You can also establish the online connection beforehand.
5. In the project tree call the "Online & diagnostics" function for the displayed device.
The diagnostics view is displayed in the Startdrive working area. From the secondary navigation
of the diagnostics view, you can call up some diagnostic information and data for the drive
device and perform several important basic functions.
The following illustration shows the structure of a diagnostics view:
328
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
/ .