Yamaha DRCX User Manual page 224

7) The saved status of data on the memory card
can be checked by pressing
To check the saved status in AREA 3 onward,
press or
STEP STEP
UP DOWN
to the screen in step 6, press
8) If data already exists in the area specified in
step 6, a confirmation message appears.
To overwrite the data in the selected area, press
F1
(yes).
To change the selected area, press
9) Set an ID number for the data being saved.
Using the number keys (0 to 9), the "-" (minus)
key, and the "." (period) key, enter a number of
up to eight characters and then press
10)A confirmation message appears.
To save the data, press
To cancel, press
11)This screen is displayed while the data is being
saved.
12)When saving is finished, the screen returns to
step 4.
c
CAUTION
Never eject the memory card during saving of data.
Do not leave the memory card inserted into the TPB when not in use. This shortens the backup battery life.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(ID) in step 6.
F1
to scroll the screen. To return
.
ESC
(no).
F2
.
F1 (yes).
(no).
F2
10-6 Using a Memory Card
[SYS-B.UP-ID]
AREA 0 : 00.06.01
AREA 1 : 00.06.10
AREA 2 :
[SYS-B.UP-SAVE]
AREA 1 already saved
delete OK ?
1yes 2no
[SYS-B.UP-SAVE]AREA1
make identification
ID=_
Effective key[0→9-.]
[SYS-B.UP-SAVE]AREA1
save OK ?
ID=00.07.01
1yes 2no
[SYS-B.UP-SAVE]AREA1
saving ...
[SYS-B.UP]
select menu
1SAVE2LOAD3FMT 4ID
10-
10
17