Table of Contents
Advertisement
1. From the Main Menu, scroll down to "System Functions."
2. Go to "Controller Maintenance."
3. Choose "Advanced Maintenance."
4. Select "Download Boot Record and Firmware."
5. Set ZMODEM as the file transfer protocol of your terminal
emulation software.
6. Send the Boot Record Binary to the controller. In HyperTerminal,
go to the "Transfer" menu and choose "Send file." If you are not
using Hyper Terminal, choose "Upload" or "Send" (depending on
the software).
7. After the Boot Record has been downloaded, send the Firmware
Binary to the controller. In HyperTerminal, go to the "Transfer"
menu and choose "Send file." If you are not using Hyper Terminal,
choose "Upload" or "Send" (depending on the software).
8. When the Firmware completes downloading, the controller will
automatically reset itself.
Appendix C Upgrading the Firmware
C-5
Advertisement
Table of Contents
