Press t or s
to select "Clear Drive
Status", then press ENT.
Press ENT for two seconds to confirm.
Set Each Fault-bus Error Signal Input as Active-high or Active-
low
Choose "View and Edit Periph Parms" to
enter the Main Menu, then press ENT.
Press t or s to select "Define Periph.
Active Signal", then press ENT.
Press t or s to select the desired item:
Power Supply, Cooling Fan, Temperature
Alert, or UPS Power Fail to Drive Failure,
then press ENT to choose.
Press t or s to select an alternative
selection. Press ENT for two seconds to
confirm.
Enable Each Fault-bus Error Signal Input
Choose "View and Edit Periph Parms" to
enter the Main Menu, then press ENT.
Chapter 12 Fault-Bus
Clear Drive
Status
..
Clear Drive
Status
?
View and Edit
Periph Parms ×
Define Periph.
Active Signal
..
PowerSupply Fail
Sig. Active Low
Set Power Fail Sig
Active High?
View and Edit
Periph Parms ×
241