Table of Contents
Advertisement
The message "Redud Ctlr LG Assign Sec
Ctlr?" will appear. Press ENT for two
seconds to confirm. The logical drive has
now been assigned to the Secondary
controller.
Map the LUN to the Secondary controller. The Secondary controller
must have a host SCSI ID created. (Create the Secondary controller's
SCSI ID or add a SCSI ID channel in "View and Edit SCSI Channels"
of the Main Menu.)
Reset the two controllers and host computers for the settings to take
effect.
Only firmware versions 2.11 and above can assign
logical
drives
controllers. Firmware versions earlier than 2.11 will
automatically assign a logical drive to the primary
controller and are unable to assign a logical drive to
the secondary controller.
Chapter 9 Redundant Controller
Redud Ctlr LG
Assign Sec Ctlr?
to
the
primary
or
secondary
197
Advertisement
Table of Contents
