Table of Contents
Advertisement
The mapping information will be shown
on the LCD. Press ENT for two seconds
to confirm the LUN mapping.
Viewing and Deleting LUN Mappings
Press ENT for two seconds to enter the
Main Menu. Press t or s to select "View
and Edit Host Luns", then press ENT.
Press t or s to select a host channel,
then press ENT for two seconds.
Press t or s to select a SCSI ID, then
press ENT for two seconds.
Press t or s to browse through the LUN
number
and
its
information.
Press ENT on the LUN you wish to
delete.
Press ENT for two seconds to confirm
deletion. The deleted LUN has now been
unmapped.
Pass-through SCSI Commands
Pass-through SCSI commands facilitate functions like downloading
firmware for drives or devices (not firmware), setting SCSI drive mode
parameters, or monitoring a SAF-TE device directly from the host. To
perform such a function, the SCSI device must be mapped to a host
SCSI ID.
Chapter 7 General Front Panel Operation
CH=0 ID=0 LUN=0
MaptoLG=0 PRT=0?
View and Edit
Host Luns
Map Channel=0
Map Channel=0
ID=0 Pri. Ctrl?
Ch=0 ID=0 LUN=0
LUN
mapping
Mapto LG=0 PRT=0
Delete C=0 ID=0
LUN=0 Mapping
CH=0 ID=0 LUN=0
Not Mapping
×
?
?
91
Advertisement
Table of Contents
