SCSI drive information will be displayed
on the LCD. Press t or s to select a
SCSI drive, then press ENT.
Press t or s to select "Identify Drive",
then press ENT to continue.
Press t or s to select "Flash All SCSI
Drives". Now press ENT for two seconds
to flash the read/write LEDs of all the
connected drives.
Or, press t or s to select "Flash
Selected SCSI Drives", then press ENT
for two seconds to flash the read/write
LED of the selected drive. The read/write
LED will light for one minute.
Deleting Spare Drive (Global / Local Spare Drive)
Press ENT for two seconds to enter the
Main Menu. Press t or s to select "View
and Edit SCSI Drives", then press ENT.
SCSI drive information will be displayed
on the LCD. Press t or s to select the
spare drive you wish to delete, then
press ENT.
Press t or s to select "Delete Spare
Drive", then press ENT to continue.
Chapter 7 General Front Panel Operation
C=1 I=0
1010MB
GlobalSB SEAGATE
Identify Drive
..
Flash All SCSI
Drives
?
Flash
Selected
SCSI Drives
?
View and Edit
SCSI Drives ×
C=1 I=0
1010MB
GlobalSB SEAGATE
Delete Spare
Drive
..
97