Table of Contents
Advertisement
Baud rate, Data Routing and Enable Terminal Emulation
In the Communication Parameter menu, select "RS-232 Port
Configuration". Choose "COM 2 Configuration" to configure the COM 2
port of the AA-3102RS RAID Controller.
Set the baud rate of the modem and the client terminal emulation
program. In this example, COM 1 and COM 2 are used for terminal
emulation at the same time. The baud rate for both COM 1 and COM
2 must be the same.
Set the "Data Routing...." to "Data Routing Direct to Port", and enable
the Terminal Emulation. The Modem is now ready to answer the dial-
in connections.
If COM 1 and COM 2 are both used as terminal
emulation, the baud rate must be the same.
The baud rate setting in the client (remote site)
terminal emulation program must be the same
as the baud rate setting of the controller's COM
port.
218
User's Guide
Advertisement
Table of Contents
