Table of Contents
Advertisement
Select "Modem Initialization ..", then
press ENT.
Enter the AT command, if required, then
press ENT for two seconds when
finished.
Modem Operating Modes
To send the initialization command to the Modem, there are three
selectable options:
Sending Default Init command only - "None"
Sending Custom Init command only - "Replace"
Sending Default Init command plus Custom Init command -
"Append"
In the "Modem Setup" menu, press ENT.
Select "Modem Operation Modes ..", then
press ENT.
The current setting of this item will be
displayed on LCD. Press ENT.
Choose None, Replace or Append, then
press ENT for two seconds.
Chapter 11 Redundant Host, Multiple Host
Modem Initialization..
Custom Init Cmd:
ATÛ
Modem Setup
..
Modem Operation
Modes
..
Custom ModemInit
None-DefaultUsed
Custom Modem
Init - None
?
221
Advertisement
Table of Contents
