Table of Contents
Advertisement
Always keep the terminal emulation screen on
the Initial screen for security checking. The
controller's
verification only when entering the Main Menu
from the Initial screen.
The terminal emulation screen for both COM 1
and COM 2 connections are synchronized.
Users connected to COM 1 and COM 2 can see
each other's operating screen.
Hardware Connection for AA-3102RS
Pick up a standard external modem which uses standard AT
command set. Connect the modem to COM 1 or COM 2 of the AA-
3102RS RAID controller. Complete the other connections of the
modem (power cables and phone wires) and switch on the power of
the Modem.
Setting AA-3102RS using the RS-232C Terminal Interface
The following example shows connecting COM 1 to the local terminal
emulation, and COM 2 to the modem:
214
password
will
be
asked
for
User's Guide
Advertisement
Table of Contents
