Maintenance and Servicing
10.3 Maintenance
10.3.1
Installation device
Description
The installation device is used for installing and removing the power blocks for the Basic Line
Modules, Smart Line Modules, Active Line Modules, and Motor Modules in chassis format.
The mounting equipment cannot be used for Motor Modules Chassis-2.
It is used as a mounting aid and is placed in front of and secured to the module. The
telescopic rails allow the withdrawable device to be adjusted according to the height at which
the power blocks are installed. Once the mechanical and electrical connections have been
undone, the power block can be removed from the module, whereby the power block is
guided and supported by the guide rails on the withdrawable devices.
Figure 10-1
Article number
The article number for the installation device is 6SL3766-1FA00-0AA0.
462
Installation device
Air-cooled chassis power units
Equipment Manual, 06/2020, 6SL3097-5AE00-0BP3