Siemens SINAMICS S120 Manual page 216

Line Modules
5.4 Active Line Modules
Article number
Dimensions
- Width
- Height
- Depth
Frame size
Weight
Recommended fuse
5)
- Number per phase (connected in parallel)
- Rated current
- Frame size acc. to IEC 60269
Minimum short-circuit current
The specified power loss is the maximum value at 100% capacity utilization. The value in normal operation is lower.
1)
Total sound pressure level of Active Interface Module and Active Line Module.
2)
The cable lengths are valid for use in the IT system. When used in the TN system, the cable lengths are shortened to 30%
3)
of the specified value.
When used in the TN system and when operating the connected Motor Modules with increased pulse frequency, you will
4)
receive the permitted cable lengths upon request.
To achieve a UL-approved system, it is absolutely essential to use the fuse types specified in the table.
5)
Minimum current required for reliable triggering of the protective devices.
6)
214
6SL3330– 7TG35–8AA3
mm 503
mm 1475
mm 540
HX
kg 290
3NE1447-2
1
670
3
kA 8.4
6)
7TG37–4AA3 7TG41–0AA3
704 704
1480 1480
550 550
JX JX
450 450
3NE1448-2 3NE1436-2
1 2
850 630
3 3
10.5 16
Air-cooled chassis power units
Equipment Manual, 06/2020, 6SL3097-5AE00-0BP3
7TG41–3AA3
704
1480
550
JX
450
3NE1438-2
2
800
3
20