Transport, Package And Storage; Unpacking The Device; Repacking The Device; Storing The Device - Siemens PowerLink 100 Product Information

1.2

Transport, Package and Storage

Unpacking the Device

1.2.1
NOTE
i i
Devices are tested prior to delivery. The verification certificate is part of the device and can be called up
with the product.
Devices are packed on site in a way that meets the requirements.
Check the packing for external transport damage. Damaged packing may indicate that the devices
²
inside have also a damage.
Unpack devices carefully; do not use force.
²
Visually check the devices to ensure that they are in perfect mechanical condition.
²
Check the enclosed accessories against the delivery note to make sure that everything is complete.
²
Keep the packing in case the devices must be stored or transported elsewhere.
²
Return damaged devices to the manufacturer, stating the defect. Use the original packaging or transport
²
packaging that meets the requirements.

Repacking the Device

1.2.2
If you store devices after incoming inspection, pack them in suitable storage packaging.
²
If devices are to be transported, pack them in transport packing.
²
Put the accessories supplied and the test certificate in the packing with the device.
²

Storing the Device

1.2.3
Only store devices on which you have carried out an incoming inspection, thus ensuring that the
²
warranty remains valid. The incoming inspection is described in Chapter Incoming Inspection.
The device must be stored in rooms, which are clean, dry, and dust-free. Devices or associated spare
²
parts must be stored at a temperature between –40° C and +70° C.
Siemens recommends that you observe a restricted storage temperature range of +10° C to +35° C in
²
order to prevent the electrolytic capacitors used in the power supply from aging prematurely.
If the device shall be stored for a long time, connect it every 2 years to an auxiliary voltage for 1 to 2
²
days. This will cause the electrolytic capacitors to form on the printed circuit board assemblies again.
If devices must be shipped elsewhere, you can reuse their transport packaging. If using other packaging,
²
ensure that the transport requirements are met.
Smart Communications, PowerLink 100 and PowerLink 50, Product Information
E50405-U53-X-B3-7670, Edition 11.2014
Safety Instructions

1.2 Transport, Package and Storage

11