Siemens SINAMICS S120 Manual page 423

You must take into account the following specifications when using a SINAMICS S120 Chassis
drive line-up:
• Ventilation clearance
• Cabling
• Air guidance
Table 9- 4 Ventilation clearances for the components
Component
Basic Line Module
Active Interface Module
Active Interface Module
Active Interface Module
Active Interface Module
Chassis-2
Smart Line Module
Active Line Module
Active Line Module
Chassis-2
Motor Module
Motor Module Chassis-2
The clearances refer to the area around the ventilation slots on the front cover.
1)
The clearances refer to the area around the air intake of the fan and the upper ventilation slots in the lateral cover.
2)
Note
Notes on the dimensions
The dimensions refer to the outer edges of the devices.
Dimension drawings are available in the relevant chapters.
Air-cooled chassis power units
Equipment Manual, 06/2020, 6SL3097-5AE00-0BP3
Frame size
FB, GB, GD
FI
GI
HI, JI
FS2, FS4, FS4+
GX, HX, JX
FX, GX, HX, JX
FS2, FS2+, FS4, FS4+
FX, GX, HX, JX
FS2, FS2+, FS4, FS4+
Clearance at Clearance
the front (above)
[mm] [mm]
40 250
1)
40 250
1)
50 250
1)
40 250
1)
20 70
1)
40 250
1)
40 250
1)
0 200
40 250
1)
0 200
Cabinet design and EMC
9.3 Cabinet air conditioning
Clearance Clearance at
(below) the side
[mm] [mm]
150 0
150 0
150 0
0 0
0 20
150 0
150 0
0 80 (clearance
to the right)
150 0
0 80 (clearance
to the right)
2)
2)
421