Siemens SINAMICS S120 Manual page 153

Article number
Recommended fuse
2)
- Number per phase (connected in parallel)
- Rated current
- Frame size acc. to IEC 60269
Minimum short-circuit current
The specified power loss is the maximum value at 100% capacity utilization. The value in normal operation is lower.
1)
To achieve a UL-approved system, it is absolutely essential to use the fuse types specified in the table.
2)
Minimum current required for reliable triggering of the protective devices.
3)
The first value applies for one precharging resistor for each phase, the second value for two precharging resistors con-
4)
nected in parallel for each phase
Air-cooled chassis power units
Equipment Manual, 06/2020, 6SL3097-5AE00-0BP3
6SL3330– 1TE41–5AA3
3NE1437-2
2
710
3
kA 18.4
3)
5.2 Basic Line Modules
1TE41–8AA3
3NE1435-2
3
560
3
18.6
Line Modules
151