Kenwood NX-5000 Series Function Reference page 54

1 DMR CONVENTIONAL SYSTEM
1.8 Making an Informative Group Call (Broadcast Group Call)
Receiving a Broadcast Group Call
If the received Group ID matches the Group ID configured for the transceiver, the transceiver can receive the Broadcast
Group Call.
Note
The transceiver can receive the Broadcast Group Call initiated using the Group ID for which "ALL" is configured even if
no Group ID is configured for the transceiver.
Operating the transceiver
1
Press the Broadcast key.
The " " icon blinks, and then "Broadcast" and a received Group ID
appear.
If Unit ID Display on Group Call is enabled, the ID Name of the transmitting
transceiver is displayed. (Refer to
a Group Call (Unit ID Display on Group
Note
If Busy LED is enabled, the LED lights green when the transceiver is receiving. (Refer to Common FUNC
0
If Alert Tone is configured to sound when receiving, an Alert Tone will sound. (Refer to
0
receiving a Group Call.)
If Selective Call Alert LED or Optional Signaling LED is enabled, the LED flashes when the transceiver is receiving.
0
(Refer to Transceiver behavior when receiving a Group
The transceiver can send the ID of the transmitting transceiver from the communication port on the transceiver when
0
receiving a Broadcast Group Call. (Refer to
Output).)
DMR FUNC (K, F)/Ver 2.20
Display When the Transceiver Receives
Call).)
Call.)
Sending the Received Unit ID from the Communication Port (Unit ID Serial
G r o u p
S Q U A D 0 3
O F F I C E
M en u Zo ne+
Busy
Transceiver behavior when
CONTENTS INDEX
A
12 : 34
M
LED.)
37