Kenwood NX-5000 Series Function Reference page 156

4 SCAN
4.3 Scan by Registering Multiple Target Channels for Scan in the List (List Scan)
Transceiver Behavior in the Case that the Scan Cannot Be Resumed (List Scan)
If the transceiver manually switches during the scan to the zone or channel which does not satisfy the condition to resume
the scan, the transceiver displays the selected channel and the scan remains paused.
If the PTT switch is pressed while the condition to resume the scan is not satisfied, the transceiver transmits using the
Revert Channel. Upon elapse of the time configured in Dwell Time after completion of the transmission, the transceiver
reverts to the selected channel; however, the scan does not resume.
Scan List
In order to use List Scan, target members for List Scan must be registered in a Scan List. A maximum of 128 Scan Lists
can be configured. In each Scan List, a maximum of 31 Zone-channels can be registered as target members for List Scan.
Scan Type (Scan List)
In order to register a target member for List Scan, Scan Type (Scan List) must be configured.
Configuration
A Zone-channel in a system where "Analog Conventional", "P25 Conventional", "NXDN
Conventional Conventional", or "DMR Conventional" is configured in System Type can be registered as a
member for List Scan. Configuring a Priority Channel enables Priority Scan.
A Zone-channel in a system where "LTR Trunking", "Analog Conventional", "Analog
LTR and Conventional Conventional", "Analog Conventional", "P25 Conventional", "NXDN Conventional", or "DMR
Conventional" is configured in System Type can be registered as a member for List Scan.
Scan List Number (Channel)
List Scan is executed according to the Scan List Number configured for the channel where scan is initiated. According to
the configuration in Scan List Number, List Scan is executed as follows:
Configuration
Zone Common List Scan is executed by referring to the Scan List Number configured for the zone.
1 to 128 List Scan is executed according to the List Number in the corresponding Scan List.
None List Scan is not executed.
Configuration using KPG-D1/ D1N
Configuring Scan List (
DMR FUNC (K, F)/Ver 2.20
Table 4-1 Scan Type (Scan List)
Table 4-2 Scan List Number (Channel)
Transceiver Settings > Scan > Scan List > Members)
Description
Description
CONTENTS
139
INDEX