Kenwood NX-5000 Series Function Reference page 11

About the Programming Software
About the Programming Software
Various functions and parameters of the transceiver can be configured by using the KPG-D1/ D1N software. Various
functions can be enabled by connecting the transceiver to a PC by use of the KPG-36U/ KPG-36X (Portable) or KPG-46U/
KPG-46X (Mobile) programming cable and writing the data configured using KPG-D1/ D1N to the transceiver. In this manual,
a corresponding reference in the help texts of KPG-D1/ D1N is described for each function of the Function Reference.
Therefore, you can configure the function by referring to the function also appearing in the texts of KPG-D1/ D1N.
About KPG-D1N
KPG-D1N is the programming software to configure functions for the transceiver to be used in the U.S.A.
KPG-D1N is compliant with the FCC Part 90 standard so that the specification does not allow "Wide" (25 kHz) to be
configured in Channel Spacing for a VHF or UHF (except 300 MHz) transceiver in the frequency band regulated by the
FCC Part 90. Except for the function above, specifications of KPG-D1 and KPG-D1N are the same.
About the Notation of "Configuration Using KPG-D1/ D1N"
In this manual, for the description of each function written as "Configuration using KPG-D1/ D1N", a corresponding reference
in the help texts of KPG-D1/ D1N is described. Therefore, you can configure the function by referring to the function also
appearing in the help texts of KPG-D1/ D1N.
About the Zone-channel Format
Using KPG-D1/ D1N, the zone information of the transceiver can be configured by selecting whether to configure for each
zone the channels in the same communication system (Analog Conventional, P25 Conventional, NXDN Conventional, DMR
Conventional, P25 Trunking, NXDN Trunking), or channels in different systems.
Channel Table:
The communication system to be used can be selected for each zone. Only channels which use the same communication
system can be configure in a zone.
Personality:
The communication system to be used can be selected for each channel. Channels which use different communication
systems can exist in a zone.
In this manual, the Channel Table format or the Personality format may be described in explanations and references. This
indicates that the function is enabled only when the format is configured. Also, the data configured by the Channel Table
format can be migrated to the Personality format, but the data configured by the Personality format cannot be migrated to
the Channel Table format.
Refer to the help texts of KPG-D1/ D1N for the method for configuring Zone-channel Format using KPG-D1/ D1N.
DMR FUNC (K, F)/Ver 2.20
CONTENTS INDEX
x