Kenwood NX-5000 Series Function Reference page 39

1 DMR CONVENTIONAL SYSTEM
1.5 Making an Individual Call
Individual ID List
If making Individual Calls, the desired Unit IDs need to be preconfigured in the transceiver using KPG-D1/ D1N prior to use
of the transceiver. A maximum of 1500 Unit IDs can be configured for Individual ID List.
Configuration
A Unit ID can be configured in the range between 000001 and FFFCDF (hexadecimal), or between
ID
1 and 16776415 (decimal).
The caller's ID Name is configured. A maximum of 14 characters can be configured for the ID
Name.
ID Name
If the ID Name of the transmitting transceiver is configured in the Individual ID List, the ID Name
of the transmitting transceiver appears when the transceiver receives a call.
The permission or inhibition of transmission of the receiving party can be configured.
An ID for which "Receive Only" is configured for ID Mode does not appear on the ID selection
display in Individual Call Mode, and a user cannot select the ID in Individual Call Mode.
ID Mode
If the transceiver receives a call from an ID for which "Receive Only" is configured for ID Mode,
the caller's ID Name appears. In this case, a user cannot initiate a call to the party even if the user
attempts to respond by pressing the PTT switch.
Individual:
Alert Tone
Paging:
Individual:
Paging:
Alert LED Color
Configuration using KPG-D1/ D1N
Configuring Individual ID List (
DMR FUNC (K, F)/Ver 2.20
Table 1-8 Individual ID List
The type of tone sounding from the transceiver can be configured for an Individual Call from the
Unit IDs configured in the Individual ID List.
The type of tone sounding from the transceiver can be configured for a Paging Call from the
Unit IDs configured in the Individual ID List.
The color of flashing LED can be configured for an Individual Call from the Unit IDs configured
in the Individual ID List.
The color of flashing LED can be configured for a Paging Call from the Unit IDs configured in
the Individual ID List.
Note
To use Alert LED Color, Selective Call Alert LED needs to be enabled.
Transceiver Settings > DMR > Individual ID List)
Description
CONTENTS
22
INDEX