Kenwood NX-5000 Series Function Reference page 161

4 SCAN
4.5 Scanning the Specific Channel Preferentially (Priority Scan)
4.5 Scanning the Specific Channel Preferentially (Priority Scan)
Priority Scan is the function to prioritize and scan the target channels.
This function can be used for Single Scan or List Scan in a Conventional channel.
0
Single Scan
A maximum of 2 Priority Channels can be configured in each zone.
0
List Scan
A maximum of 2 Priority Channels can be configured in each Scan List.
If a Priority Channel is configured, the transceiver monitors Priority Channel by executing Lookback even when receiving on a
normal channel.
On the channel where Priority 1 has the highest priority, Lookback is not executed while receiving on Priority 1.
Priority 2 is the channel prioritized next to Priority 1; therefore, Lookback is executed on Priority 1 while receiving on Priority 2.
Priority Channel Type (Type)
Priority Channel Type can be selected from "None", "Fixed", "Selected" and "Operator Selectable".
Configuration
None No Priority Channel is configured.
The channel configured using KPG-D1/ D1N is configured as the Priority Channel. The Priority cannot
Fixed
be changed by operating the transceiver.
Selected The channel selected on the Transceiver is configured as the Priority Channel.
The channel configured by a user in Priority-channel Select Mode (Single Scan/ Multi-Zone Scan) or
Operator Selectable Scan Program (List Scan) is configured as the Priority Channel. (Refer to
Channel,
Transceiver behavior
0
If the Zone-channel configured for the Priority 1 is selected, or if the scan is paused on the Zone-
channel configured for the Priority 1
The " " icon appears. When Priority Scan is paused, the "
DMR FUNC (K, F)/Ver 2.20
Table 4-3 Type
Changing the Scan List (Scan
Z o n e 1
C h a n n e l 1
Me nu Z on e+
Description
Program).)
" icon blinks.
A
12 : 34
M
CONTENTS
Changing the Priority
144
INDEX