Toro Groundsmaster 360 Service Manual page 45

Removing the Radiator
Groundsmaster 360
16225SL Rev C
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Unlatch the hood and raise it.
If the radiator or engine is hot, pressurized hot coolant can escape
and cause burns.
Do not open the radiator cap or drain the radiator when the coolant
is hot.
Ethylene-glycol antifreeze is poisonous.
Keep coolant away from children and pets.
Keep the coolant in a labeled container.
Discard the coolant in accordance with local hazardous waste
ordinances.
g036471
1. Radiator
2. Radiator cap
3. Oil cooler
4. Screw (4 each)
3. Remove the radiator cap (item 2 in
4. Remove the pipe plug (item 8 in
and completely drain the coolant from the radiator into a suitable container.
5. Disconnect the following hoses from the radiator:
WARNING
WARNING
Figure 11
5. Flat washer (8 each)
6. Lock washer (4 each)
7. Hex nut (4 each)
8. Pipe plug
Figure 11) from the radiator.
Figure 11) from the bottom of the radiator
Page 3–13 Diesel Engine: Service and Repairs