Toro Groundsmaster 360 Service Manual page 173

Assembling the Transmission (continued)
Groundsmaster 360
16225SL Rev C
g033447
1. Socket-head plug
2. Hex plug
6. Lubricate new O-rings and install the O-rings onto the socket-head plug and
hex plug. Install both the plugs into the transmission pump housing; torque
the plugs to 23 to 26 N∙m (17 to 19 ft-lb).
g033446
1. Bearing
2. PTO gear
7. Install the retaining ring into the groove in the PTO gear bore. Press both
the bearings into the PTO gear until each bearing contacts the retaining
ring that is installed.
Figure 107
3. Pump housing
Figure 108
3. Retaining ring
Page 4–115 Hydraulic System: Service and Repairs