Toro Groundsmaster 360 Service Manual page 155

Installing the Transmission (continued)
Groundsmaster 360
16225SL Rev C
15. Ensure that the drain plugs are properly installed in the hydraulic tank and
transmission. Fill the hydraulic tank with the correct quantity of new hydraulic
fluid.
16. Install the power center assembly; refer to
Assembly (page 6–56)
to Installing the Power Center Assembly (page
17. Connect all the electrical connectors and platform harness.
18. Install the operator seat and seat base; refer to
(page 6–61).
19. Adjust the traction linkage as necessary; refer to
(page 4–89).
20. On the machines with operator cab, install the cab doors to the cab.
21. Install the cutting deck; refer to Cutting Deck Operator's Manual.
or, if the machine is equipped with operator cab; refer
Page 4–97
Installing the Power Center
6–58).
Installing the Operator Seat
Traction Linkage Assembly
Hydraulic System: Service and Repairs