Battery Hydrometer
Dielectric Gel
Groundsmaster 360
16225SL Rev C
g033640
Use the battery hydrometer when measuring the specific gravity of the battery
electrolyte. You can get this tool locally.
g033639
Toro Part No. 107-0342
Use the dielectric gel to prevent corrosion of unsealed connection terminals. To
ensure complete coating of the terminals, liberally apply the gel to the component
and wire harness connector, plug the connector into the component, unplug
the connector, apply the gel to both surfaces again, and connect the harness
connector to the component again. The connectors must be fully packed with
gel for effective results.
Note: Do not use the dielectric gel on the sealed connectors as the gel can
unseat the connector seals during assembly.
Figure 164
Figure 165
Page 5–7
Electrical System: Special Tools