Air Conditioning Compressor - Toro Groundsmaster 360 Service Manual

Air Conditioning Compressor

g036617
1. Flange nut (7 each)
2. Washer fluid tank
3. Carriage screw (2 each)
4. Washer fluid tank bracket
5. Carriage screw (4 each)
6. Screw (3 each)
7. V-belt
8. Compressor pulley
9. Hose clamp (4 each)
Removing the Air Conditioning Compressor
Operator Cab: Service and Repairs
10. Straight fitting
11. Heater hose
12. Straight fitting
13. Lower radiator hose
14. Hose clamp (2 each)
15. Radiator fitting
16. Lower radiator hose
17. Compressor bracket
18. Screw (2 each)
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Raise the hood to get access to the engine and air conditioning compressor.
3. Remove the battery and battery tray from the machine; refer to
and Installing the Battery (page
4. Remove the compressor shield behind the battery.
Figure 319
19.
20.
21.
22.
23.
24.
25.
26.
5–110).
Page 8–6
Convoluted conduit
Shim
Compressor assembly
Locknut (2 each)
Carriage screw
Idler pulley
Discharge hose fitting
Suction hose fitting
Removing
Groundsmaster 360
16225SL Rev C