CrossTrax Traction Manifold Assembly
g036301
1.
Traction manifold assembly
2.
O-ring
3.
45° hydraulic fitting (2 each)
4.
O-ring
5.
Straight fitting
Removing the CrossTrax Traction Manifold Assembly
Groundsmaster 360
16225SL Rev C
6.
90° hydraulic fitting
7.
Washer (4 each)
8.
Mount (2 each)
9.
Washer (2 each)
10.
Mount plate
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
Before opening the hydraulic system, operate all the hydraulic
controls to release system pressure and avoid injury from the
pressurized hydraulic fluid; refer to
Hydraulic System (page
2. Read the
General Precautions for Removing and Installing the Hydraulic
System Components (page
Figure 133
11.
12.
13.
CAUTION
Releasing Pressure from the
4–5).
4–68).
Page 4–129
Tinnerman nut (2 each)
Bolt (2 each)
Flange-head screw (2 each)
Hydraulic System: Service and Repairs