Siemens SINAMICS S120 Equipment Manual page 58

Line-side power components
3.2 Active Interface Modules
Figure 3-10
Mounting the filter module
The filter module is mounted using a mounting plate, which is attached to the rear of the
electrical cabinet. The mounting plate has a mechanism to lock the filter module to the plate;
this is activated by moving the lever on the lower side once the filter module is in place. After
locking, the lever must be kept in position using a locking screw.
Refer to Chapter "Dimension drawing (Page 54)" for the dimensions of the mounting plate.
After mounting and locking the filter module on the mounting plate, struts must be attached
to the front to provide mechanical support.
Note
Mounting equipment for power units
The mounting equipment for power units can be used to mount the filter module, see
"Mounting equipment for power units (Page 282)".
58
Transport plate on the underside of the filter module
Water-cooled chassis power units for common cooling circuits
Manual, 08/2017, 6SL3097-4AM10-0BP0