5.5
Installation
Figure 5-8
Rail profiles on the underside of the device
Rail profiles are provided at the lower side of the device, that are used to place down the
devices during transport at the mounting location - and for installation and removal.
Note
Mounting equipment for power units
The mounting equipment for power units can be used to mount the Active Line Module, see
"Mounting equipment for power units (Page 282)".
Water-cooled chassis power units for common cooling circuits
Manual, 08/2017, 6SL3097-4AM10-0BP0
Crane lifting lugs / screw coupling points for mechanical support
Active Line Modules
5.5 Installation
123