Table of Contents
Advertisement
AC Power Supply Module
Input voltage
Total Power
Outputs
Battery Charger
Diagnostic LEDs
No Load Power
Consumption
Efficiency
Inrush Current
Power Factor
Protection
Output Protection
Insulation
Dimensions
Weight
100-240 V AC, 50/60 Hz
100-240 V AC, 50/60 Hz with 12V smart battery charger
Maximum 60 W continuous; maximum 105 W peak @ 25% duty cycle
Motherboard connector (to CPU and I/O modules): 13.2 V DC ±20%, max. 4 A
AUX1A/AUX1B: 13.2 V DC ±20%, max. 8 A, on/off controlled by user
program
AUX2A/AUX2B (configurable): equal to AUX1A/AUX1B voltage, max. 8 A,
or 3.3, 5, 7.5, 9 V DC ±10%, max. 2.5A, on/off (default) controlled by user
program
Note: max. 8 A total current consumption from all outputs
12 V Lead Acid battery charger (in PS with charger)
Automatic charging of 6.5 or 10 Ah backup battery, battery temperature sensing,
overcharging protection, battery capacity test and diagnostics, automatic battery
switch-over
Status LED for: input voltage, AUX1 and AUX2 outputs, 12V Control for DO
modules, and battery
130 mA @ 220 V AC
80% typical @230 V AC, 76% typical @115 V AC (full load)
25 A maximum, for 2 mSec. Max, cold start at 25°C
0.98 typical at 230 V AC, 0.99 typical at 115 V AC
Internal line fuse, replaceable
AUX2A/B short circuit, automatic recovery on 3.3, 5, 7.5, 9 V
Input to case: 1500 V AC, input to output: 3000 V AC
56 mm W x 225 mm H x 180 mm D (2.2" W x 8.7" H x 7.1" D)
Approx. 1kg (2.2 lb)
Specifications subject to change without notice.
Power Supply Module and Backup Battery
3-14
Advertisement
Table of Contents
