Table of Contents
Advertisement
CDM750 Radio Installation Kit
The CDM750 radio installation kit (ACE3600 option V143AH/kit FLN3638A) enables the
user to install the CDM750 radio series in ACE3600 Remote Terminal Units (RTU). The
FLN3638A installation kit includes a bracket, adapter, and cables.
Installation
The CDM750 radio can be mounted on the ACE3600 RTU as follows:
Procedure 21-16 How to Install the CDM750 Radio on the Metal Chassis
1.
Attach the radio plug-in port from the installation kit (FLN3696A) to the desired opening
on the ACE3600 CPU module. For instructions on attaching plug-in ports, see
Connecting Plug-In Ports to the CPU Module in the CPU Module chapter above.
2.
Connect the radio adapter (FLN3639A) 16-pin connector to the radio Accessory
connector (See Figure 21-14.)
3.
Connect the power cable (FKN8436A) to the radio power connector, and the opposite
end of the cable to the AUX1A or AUX1B connector on the ACE3600 power supply
module. Connect the free red wire to the ignition pin on the radio adapter.
4.
Connect the communication cable (FKN8427A) to the rear connector (8-pin RJ45
connector) of FLN3639A. Place one Fair-Rite soft ferrite (#7683477X01 from the
supplied ferrite kit FHN7007A) on the cable near the bottom of the CPU door, loop the
cable one turn around it, and clamp the ferrite on the cable.
Connect the other end of the communication cable to the plug-in port of the ACE3600
CPU module.
Radio Adapter
(
FLN3639A
Communication
Cable (
Figure 21-14 CDM750 Antenna, Power and Communication Cable Connections
Power
)
Connector
Power Cable
)
(
FKN8427A
FKN8436A
Antenna Cable
)
(
FKN8429A
21-27
Radio Types and Installation Kits
Antenna
Connector
)
Advertisement
Table of Contents
