Table of Contents
Advertisement
Power Cable
(
)
FKN8517A
Antenna Cable
(
FKN8430A/
)
FKN8429A
Power Supply
Figure 21-65 MTM800 Radio Installed on ACE3600 Chassis
RTU Port Configuration for the MTM800 Radio
To enable MDLC communication using MTM800 radios (for packet data only), use the
ACE3600 STS site configuration utility to configure the ACE3600 RTU plug-in port
connected to the radio.
The figure below shows the port configuration and advanced parameter configuration.
Although this shows Port PI1, the same values can be applied to other serial or plug-in ports,
where relevant.
Port Type
Procedure 21-35 How to Configure the ACE3600 Port for the MTM800 Radio
1. In the ACE3600 STS, click on the desired site, and open the site view.
2. In the Port Tab, click on the on-board or plug-in port through which the RTU will
communicate with the MTM800 radio.
3. Confirm that the port parameters and data speed are as shown in the screen below.
Radio Mounting Screws
(#
)
0387839V89
CPU
21-82
Radio Types and Installation Kits
Metal Bracket
(
FHN6894A
MTM800
Radio
Communication
Cable
(
FKN8516A
)
)
Advertisement
Table of Contents
