Table of Contents
Advertisement
GP/HT/PRO
Radio Body
Volume Knob
Retainer
(Motorola P/N
0787502V66)
Installation
Before installing the GP/HT/PRO radio on the RTU, configure the power supply AUX2A/B
connector to 7.5V DC in the ACE3600 STS site configuration (using the Power Supply <n>
Auxiliary 2 voltage parameter.) Download the updated site configuration to the RTU. Failure
to do this might damage the radio.
The GP/HT/PRO radio can be mounted on the ACE3600 RTU as follows:
1. Attach the radio plug-in port from the installation kit (FLN3696A) to the desired opening
on the ACE3600 CPU module. For instructions on attaching plug-in ports, see Connecting
Plug-In Ports to the CPU Module in the CPU Module chapter above.
2. Connect the audio accessory adapter (HLN9716) (Item 1) to the radio. See Figure 21-31.
3. Insert the communication cable (FKN8431A) (Item 2) into the audio accessory adapter.
4. Insert the BNC antenna adapter (FTN6045B) into the radio antenna connector (Item 3).
5. Snap the radio into the DC adapter (FCN5516B) (Item 4).
6. Insert the 7.5V DC power cable (FKN8515A) into the DC connector of the DC adapter
(Item 5).
Figure 21-30 Attach Retainer to Radio
21-38
Radio Types and Installation Kits
Metal
Volume
Rod
Advertisement
Table of Contents
