Table of Contents
Advertisement
MDS Radio Installation Kit
The MDS installation kit (V152AK/FLN3853A) enables the user to install the 9810 Spread
Spectrum, 9710A- 900 MHz and 4710 UHF Transceiver radio modems in ACE3600 Remote
Terminal Units (RTU). The kit includes a bracket and cables.
Installation
The MDS radio can be mounted on the ACE3600 RTU as follows:
Procedure 21-32 How to Install the MDS 900 Radio on the Metal Chassis
1.
Connect the radio to the bracket provided in the Hardware Kit (#0789971V39 from
FHN7066A) using the four screws, supplied with the bracket. (See Figure 21-58 below.)
Figure 21-58 MDS Radio Mounted on Metal Bracket - Front and Rear View
2.
Connect the communication cable (FKN8513A) to the 25-pin connector on the side of the
radio and tighten the screws.
21-76
Radio Types and Installation Kits
Advertisement
Table of Contents
