Table of Contents
Advertisement
1
Figure 21-31 GP/HT/PRO Radio Installation
7. Using the two screws, attach the radio assembly to the radio bracket (FHN6899A).
8. Using the three screws on the bracket, attach the bracket with the radio to the chassis of the
ACE3600. (See Figure 21-32.)
9. Connect the audio communication cable (FKN8431A) to the audio adapter (attached to the
radio). Place one Fair-Rite soft ferrite (#7683477X01 from the supplied ferrite kit
FHN7007A) on the cable near the bottom of the CPU door, loop the cable one turn around
it, and clamp the ferrite on the cable. Connect the other end of the communication cable to
the plug-in port on the front panel of the CPU module.
10. Connect the DC power cable (FKN8515A) from the DC adapter (attached to the radio) to
the AUX2A or AUX2B connector of the power supply module.
11. Route the antenna cable (FKN8434A) from the bottom of the RTU box to the BNC adapter
on the radio.
12. Use the clamps provided in the kit to route and secure the audio communication and DC
power cables. (See Figure 21-32.)
3
2
21-39
Radio Types and Installation Kits
Fit radio into
adapter
base and
press radio
to adapter.
4
5
Advertisement
Table of Contents
