Tool management
13.14 Working with multitool
The tool creation sequence can be defined differently.
13.14.3
Equipping multitool with tools
Precondition
A multitool has been created in the tool list.
Procedure
574
5.
Enter the name of the multitool, define the number of multitool
locations and select how the clearance type is determined (e.g.
multitool location number).
If you selected an angle to determine the clearance, then enter
the clearance to the reference location as angular value for
each multitool location.
The multitool is created in the tool list.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
The tool list is opened.
2.
Select the required multitool, position the cursor at an empty
multitool location and press the "New tool" softkey.
Using the appropriate selection list, e.g. favorites, select the
required tool
- OR -
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning