Machining
When machining some cycles, you can choose between roughing, finishing, or complete
machining. For certain milling cycles, finishing edge or finishing base are possible.
● Roughing
● Finishing
● Edge finishing
● Base finishing
● Complete machining
● machining step
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
One or more machining operations with depth infeed
Single machining operation
Only the edge of the object is finished
Only the base of the object is finished
Roughing and finishing with one tool in a
If you want to rough and finish using two different tools, you must call the machining cycle
twice (1st block = roughing; 2nd block = finishing). The programmed parameters are
retained when the cycle is called for the second time.
7.8 Tool, offset value, feedrate and spindle speed (T, D, F, S, V)
Creating a ShopTurn program
211