Siemens sinumerik 840D sl Operating Manual page 23

Key
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Function
+ <PAGE DOWN> + <CTRL>
Positions the cursor to the lowest line of a window.
<Cursor right>
 Editing box
 Navigation
+ <Cursor right> + <CTRL>
 Editing box
 Navigation
<Cursor left>
 Editing box
 Navigation
+ <Cursor left> + <CTRL>
 Editing box
 Navigation
<Cursor up>
 Editing box
 Navigation
+ <Cursor up> + <CTRL>
 Moves the cursor in a table to the beginning of the table.
 Moves the cursor to the beginning of a window.
Opens a directory or program (e.g. cycle) in the editor.
Moves the cursor further to the right by one character.
Moves the cursor further to the right by one word.
Moves the cursor in a table to the next cell to the right.
Closes a directory or program (e.g. cycle) in the program
editor. If you have made changed, then these are
accepted.
Moves the cursor further to the left by one character.
Moves the cursor further to the left by one word.
Moves the cursor in a table to the next cell to the left.
Moves the cursor into the next upper field.
– Moves the cursor in a table to the next cell upwards.
– Moves the cursor upwards in a menu screen.
Introduction
1.2 Operator panel fronts
23