Programming technology functions (cycles)
8.7 Further cycles and functions ShopTurn
Straight line with selected radius
compensation
If you want to prevent deviation from the programmed path, you can program the first
straight line with radius compensation or with deactivated radius compensation outside the
workpiece. Programming without coordinate data is not possible.
Procedure
Parameters
L
α
F
450
1.
The ShopTurn program to be processed has been created and you
are in the editor.
2.
Press the menu forward key and the "Straight Circle" softkey.
3.
Press the "Polar" and "Straight Polar" softkeys.
4.
Press the "Rapid traverse" softkey if you want to use rapid traverse
instead of a programmed machining feedrate.
Description
Distance to the pole, end point
Polar angle to the pole, end point (abs) or
Polar angle change to the pole, end point (inc)
The sign specifies the direction.
Machining feedrate
Straight line with deselected radius
compensation
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Unit
mm
Degrees
mm/rev
mm/min
mm/tooth
Turning