Teaching In A Program; Overview - Siemens sinumerik 840D sl Operating Manual

Teaching in a program

11.1

Overview

The "Teach in" function can be used to edit programs in the "AUTO" and "MDA" modes. You
can create and modify simple traversing blocks.
You traverse the axes manually to specific positions in order to implement simple machining
sequences and make them reproducible. The positions you approach are applied.
In "AUTO" teach-in mode, the selected program is "taught".
In "MDA" teach-in mode, you teach to the MDA buffer.
External programs, which may have been rendered offline, can therefore be adjusted and
modified according to need.
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
11
505