6.8.15.1.3 Setting The Water Hardness; Table 6-83: G 879 Programming Functions For Eplz 530; Table 6-84: G 879 Water Hardness Settings - Miele G 600 Series Technical Information

G 600/G 800
Program button
1
2
4
5

Table 6-83: G 879 Programming Functions for EPLZ 530

1
If no lights light up, the dishwasher is programmed to "without water softener". To change to "with
water softener" follow the steps in Service Mode 2 (Section 6.8.15.3).
2
Factory setting

6.8.15.1.3 Setting the Water Hardness

1. Measure the water hardness in grains per gallon (gpg).
2. Access Programming Mode.
3. Press program button 2 (should be flashing). If program button 2 is not flashing, Service
Mode 2 must be accessed and the dishwasher programmed to "with water softener".
4. Using the water hardness chart (Table 6-84), press the program button that corresponds
to the water hardness measured in Step 1, e.g., for a water hardness of 10 gpg, press
program button 4.
5. Once the button is pressed for the selected water hardness setting, program button 2 will
flash.
6. To save: Press the Top solo button twice. A flashing Top solo button indicates
successful saving of data.
7. Turn off the dishwasher.
Water hardness (gpg)
1 - 4
5 - 6
8 - 10
11 - 12
13 - 14
15 - 17
18 - 21
22 - 35
36 - 70

Table 6-84: G 879 Water Hardness Settings

6.8.15.1.4 Checking the Water Hardness Level
1. Access Programming Mode.
2. Press program button 2. A program button (1 to 5) will light up, indicating the water
hardness setting. Match the illuminated light to the water hardness chart (Table 6-84).
3. If a button does not light, press the Top solo button. The program button that lights up
along with the Top solo button will indicate the water hardness level setting.
4. Turn the dishwasher off.
6.8.15.2 Service Mode 1
1. To access the Manual Step Mode, open the dishwasher door and turn the
dishwasher off.
Function
Heated drying
Water hardness setting
Buzzer
Water quantity
Top solo button
Not pressed
Not pressed
7 Not pressed
Not pressed
Not pressed
Pressed
Pressed
Pressed
Pressed
Pressed
Technical Information
Options
2
On
Off
See Section
1
6.8.15.1.3
2
On
Off
2
Normal
Increased
Program button pressed
1
2
3
4
5
1
2
3
4
5
135
Button light status
Off
On
Flashing = 1 to 70 gpg
Off = 0 gpg
Off
On
Off
On