Preparation - NEC Storage M100 Series User Manual

User Guide

3.1 Preparation

The following accessories and tools are required for setup. Also the following preparation must to be
completed for the application servers to which a disk array unit will be connected.
1. Prepare the following items:
 Application servers, client, installation CD-ROM
 LAN cables (shielded)
Use a crossover cable to connect a unit and a client directly.

Use straight cables to connect a unit and a client via hub, etc.

Interface cables to connect application servers

 IP addresses to be assigned to the disk array unit as many as ports to be connected
Also contact the network administrator to obtain subnet masks and gateway addresses.
 Network devices (as necessary)
 Phillips screwdriver (No. 1) (for screwing)
 Three or more disk drives. Purchase new disk drive products
2. Implement the following setup preliminarily on the application server to which the disk array unit will
be connected:
Release 6.0
It is recommended to move a unit by two or more persons.
66
Chapter 3 Installing the Disk Array System