Table of Contents
Advertisement
User Guide
Parameter
Port type
IP address
Subnet mask
Gateway address
Clicking OK applies the change of settings to the list.
When you click Next after changing the port settings as needed, the port settings are made.
Release 6.0
Description
Select the port type.
Host port:
Select this when connecting to the host.
Host/Replication port:
Select this when using the remote data replication function.
This setting is displayed only when the remote data
replication function is usable.
Specify an IP address to be set for the port.
Specify a subnet mask or subnet prefix to be set for the port.
Specify a gateway address to be set for the port.
Please perform another setup after waiting about 30 seconds after
processing when a setup or change of an IP address is made. When MTU
is changed, communication with other ports in addition to the iSCSI port
may temporarily be interrupted.
182
Chapter 6 Initializing a Disk Array (iSCSI)
Advertisement
Table of Contents
Troubleshooting
